12/07/2020 - Release Update for McKinley GUI (v0.0.2-20201207) This release has following changes implemented. -- Register Map has more details along with the decoded field. -- Fixed the Scroll bar issue in Phase Current Sense Tuning screen -- Append silicon revision letter (similar to existing GUIs) in the Add Offline device screen -- Dynamic Phase Control - Fixed Output Load Simulation incorrect phase drop issue -- Limit the digits of loadline in SVID panel -- PID and Load Model - Display the PID (Kp/Ki/Kd) section - Hide Load Model, Bodeplot, and Poles/Zeros (Has “Coming Soon” message for these in the GUI) 11/30/2020 - Release Update for McKinley GUI (v0.0.1-20201130) This release has following changes implemented. -- Added HIGH_PWR settings for SVID R/W List. -- Added new SVID settings for extended capability and vid offset. -- Ioffset and other numbers do not lock to allowed values after manual entry and + button -- Changed the "Current Sense Calibration" to "Phase Current Sense Tuning" -- Customize all fault response PMBus commands -- Improvements in FAULTS screens for VOUT_OV_FAULT_RESPONSE, IOUT_OC_FALUT_RESPONSE, VIN_OV_FALUT_RESPONSE, and IIN_OC_FAULT_RESPONSE -- Remove the range limitation for all LINEAR11/16 "read-only" PMBus commands -- HP Faults being reported when HP mode is not set -- Improve Responsiveness Of Register Map Search -- Customize PMBus Command 1Bh SMBALERT_MASK view -- Reduce digits of some calculated values and GUI fields showing too many decimals -- Fixed defects in design tools -- Updated GUI help file 11/03/2020 - Release Update for McKinley GUI (v0.0.1-20201103) This release has following changes implemented. -- GUI Supports Rev B(A13) silicon. It recognizes both revA(A11) and revB(A13). -- Device programming support from Registers only -- Add License Activation when the GUI is launched for the first time. -- Show PMBus values in Binary format for some functions like STATUS_xxx -- Addition of search to PMBus page -- Addition of all "READ_xxx" PMBus commands to telemetry tab -- Ability to read firmware config registers from device in config file comparator -- Added bit mask editor option for SVID settings. (Intel SVID Capability -- Improvements to Global Search functionality 10/23/2020 - Initial release of McKinley GUI (v0.0.1-20201023)